|
Coated Coils & Sheets |
 |
 |
| Coated Coils & Sheets | Thickness : -
Coated Coils (Galvanized and Non-Galvanized) : 0.4 to 2.0 mm
Coated Sheets (Galvanized and Non-Galvanized) : 0.4 to 2.0 mm
Width : -
Coated Coils (Galvanized and Non-Galvanized) : 600 to 1270 mm
Coated Sheets (Galvanized and Non-Galvanized) : 570 to 1270 mm
Length : -
Coated Sheets (Galvanized and Non-Galvanized) : 1000 to 4000 mm
Inner Diameter : -
Coated Coils (Galvanized and Non-Galvanized) : 508 to 610 mm
Outer Diameter : -
Coated Coils (Galvanized and Non-Galvanized) : 1500 mm
Weight : -
Coated Coils (Galvanized and Non-Galvanized) : 11 ton Max.
Coated Sheets (Galvanized and Non-Galvanized) : 10 ton Max.
Standard : DIN EN 10169-1
Paint Type : Polyester 20-25µ , Plastisol 200-300µ , Lamination film 200µ |
|
|
Galvanized Coils & Sheets |
|
|
| Galvanized Coils & Sheets | Thickness : -
Galvanized Coils : 0.4 to 2.0 mm
Galvanized Sheets : 0.4 to 2.0 mm
Width : -
Galvanized Coils : 600 to 1270 mm
Galvanized Sheets : 570 to 1270 mm
Length : -
Galvanized Sheets : 1000 to 4000 mm
Inner Diameter : -
Galvanized Coils : 508 to 610 mm
Outer Diameter : -
Galvanized Coils : 1500 mm Max.
Weight : -
Galvanized Coils : 11 ton Max
Galvanized Sheets : 10 ton Max
Weight of Zinc Coating : 80 to 450 gm/m² Min.
Standard :-
DIN : -
DIN 17162/1 : St 01 Z , St 02 Z , St 03 Z
DIN 17162/2 : St E250-2Z , St E280-2Z , St E280-3Z
ASTM : -
ASTM A25
ASTM A526
ASTM A446 |
|
|
Cold Rolled Coils & Sheets |
|
|
| Cold Rolled Coils & Sheets | Thickness : -
Un-Annealed Cold Rolled Coils : 0.4 to 3.2 mm
Cold Rolled Coils : 0.4 to 3.2 mm
Cold Rolled Slitted Coils : 0.4 to 2.5 mm
Cold Rolled Sheets : 0.4 to 3.2 mm
Width : -
Un-Annealed Cold Rolled Coils : 600 to 1270 mm
Cold Rolled Coils : 600 to 1270 mm
Cold Rolled Slitted Coils : 80 mm Min.
Cold Rolled Sheets : 570 to 1270 mm
Length : -
Cold Rolled Sheets : 1000 to 4000 mm
Inner Diameter : -
Un-Annealed Cold Rolled Coils : 610 mm
Cold Rolled Coils : 610 mm
Cold Rolled Slitted Coils : 610 mm
Outer Diameter : -
Un-Annealed Cold Rolled Coils : 800 to 2000 mm
Cold Rolled Coils : 800 to 2000 mm
Cold Rolled Slitted Coils : 800 to 2000 mm
Weight : -
Un-Annealed Cold Rolled Coils : 4 to 11 ton
Cold Rolled Coils : 4 to 11 ton
Cold Rolled Slitted Coils : 2 to 6 ton
Cold Rolled Sheets : 2 to 10 ton
Standard :-
AISI : 1008 to 1012
DIN : DIN 1623-1 (St 1203 , St 1303 )
ANFOR : NF A36-401 (X C , X E )
ASTM : -
ASTM A619 : DQ
ASTM A620 : DDQ
Tolerance DIN : 1541 |
|
|
Hot Rolled Coils & Sheets |
|
|
| Hot Rolled Coils & Sheets | Thickness : -
Hot Rolled Coils : 2.0 to 12.7 mm
Pickled Coils : 2.0 to 6.0 mm
Hot Rolled Sheets : 2.0 to 12.7 mm
Width :-
Hot Rolled Coils : 600 to 1525 mm
Pickled Coils : 600 to 1270 mm
Hot Rolled Sheets : 600 to 6000 mm
Length (Hot Rolled Sheets) : 1500 to 6000 mm
Inner Diameter (Hot Rolled Coils and Pickled Coils) : 670 mm
Outer Diameter : -
Hot Rolled Coils : 950 to 2000 mm
Pickled Coils : 800 to 2000 mm
Weight : -
Hot Rolled Coils : 5 to 14 ton
Pickled Coils : 5 to 12 ton
Hot Rolled Sheets : 2 to 10 ton
Standard : -
AISI : 1008 to 1023
DIN : -
DIN17100 : St 37-2 , St 37-3 , St 44-2 , St 44-3 , St 52-3
DIN 1614 : StW 22 , StW 23 , StW 24
ANFOR : -
NF A35-501 : E 24-2 , E 24-3 , E 28-2 , E 28-3 , E 36-3
NF A36-301 : 1 C , 2 C , 3 C
ASTM : -
ASTM A570 : GR. A , GR. B , GR. C
ASTM A283 : GR. A , GR. B , GR. C , GR. D
API-5L : -
GR. A
GR. B : X-42 , X-46 , X-52 , X-60
Tolerance DIN : -
Hot Rolled Coils and Pickled Coils : 1016
Hot Rolled Sheets : 1542 , 1543 |
|
|
Light and Medium Sections |
|
|
| Light and Medium Sections | 
|
Dimensions :-
Equal Angels :75x75x(6,7,8,10 or12) , 100x100x(8,10,12,14 or 16) , 120x120x(11,12,13 or 15) mm
Channels : 80x45x6 , 100x50x6 , 140x60x7 , 200x75x8.5 mm
I-Beams : 100x50x4.5 , 120x58x5.1 , 160x74x6.3 , 180x82x6.9 , 200x90x7.5 mm
Flats : 100x10 , 175x15 , 200x20
Length : 3 to 12 m
Weight : 2.0 to 5.5 ton
Standard :-
AISI : 1010 to 1023
DIN : DIN17100 (St 37-2 , St 44-2 , St 52-3 )
ANFOR : NF A35-501 (E 24-2 , E 28-2 , E 36-2)
ASTM : ASTM A36 Carbon = 0.26% Max
Tolerance DIN :-
Equal Angels : 1028
Channels : 1026
I-Beams : 1025
Flats : 1017 , 59200 |
|
|
Bars and Rods |
|
|
| Bars and Rods | Dimensions :-
Rods : 5.5,6,8,10 and 12 mm
Bars : 10,12,14,16,18,20,25,28,30,32 and 40 mm
Square : 10,12 and 14 mm
Length :-
Rods : Coils
Bars and Square : 12 m
Weight :-
Rods : 1.310 ton average
Bars and Square : 2.0 to 5.0 ton
Standard :-
AISI : 1008 to 1074
DIN :-
DIN 448 : BSt 420S
DIN17100 : St 37-2, St 44-2, St 50-2, St 60-2, St 70-2
ANFOR :
NF A35-015 : FeE22, FeE24
NF A35-016 : FeE40
NF A35-501 : E 28-2, E 50-2, E 60-2
ASTM :-
ASTM A615 : GR 40, GR 60
ASTM A36 : Carbon = 0.26% Max
Tolerance DIN :-
Rods : 488 , 59110
Bars : 488 , 1013
Square : 1014 part 1 |
|
|
Slabs |
|
|
| Slabs | Dimensions :-
Width : from 630 to 1550 mm
Thickness : 160 and 190 mm
Length : 6 m
Weight : from 5 to 14 Tons
Standard :-
AISI : 1008 to 1023
DIN : DIN17100 St 37-2, St 37-3, St44-2, St44-3, St52-3
Tolerance : -
Length : ±25 mm
Width : ±5 mm
Thickness : ±2.5 mm
Bulging : ±2.5 mm
Rhomboidity : 2.5%
Camber : Max 40 mm for 6 m |
|
|
Billets and Blooms |
|
|
| Billets and Blooms | Dimensions :-
Billets : 120×120 mm
Blooms :-
150×150 mm
175×175 mm
200×200 mm
Length : 4 -12 m
Weight :-
Billets : 0.113 ton/m
Blooms :-
(150×150) : 0.177 ton/m
(175×175) : 0.240 ton/m
(200×200) : 0.314 ton/m
Standard :-
AISI : 1008 to 1074
DIN : DIN17100 St37-2, St44-2, St 50-2, St 60-2, St 70-2
Tolerance :-
Billets :-
Cross Section Area : 2%
Length : +0 , - 50 mm
Blooms :-
Cross Section Area : 1.5%
Length : +0 , - 50 mm
Rhomboidity :
Billets : 2%
Blooms : 1.5%
Camber :
Billets : 5 mm/m, Max 30mm for 12 m
Blooms : 5mm/m
Twist :
Billets : 1 Deg/m , Max 8 Deg for 12 m
Blooms : 1 Deg/m |
|
|
Hot Briquetted Iron |
|
|
| Hot Briquetted Iron | Total Iron : 90 - 94 %
Metallic Iron : 82 - 88 %
Metallization Degree : 90 - 95 %
Carbon : 1.0 - 1.5 %
Average Size : 106×48×32 mm
Average Weight : 500 - 600 gm
Bulk Density : 2.4 - 2.8 ton/m³
Apparent Density : 4.9 - 5.5 ton/m³ |
|
|
|
