Galvanized rolls and sheets
| Types, Dimensions, and Technical Specifications | ||||||||
|---|---|---|---|---|---|---|---|---|
| Product | Thickness (mm) From/To | Width (mm) From/To | Length (mm) From/To | Internal Diameter (mm) | External Diameter (mm) | Weight (tons) Max | Zinc Coating Weight (g/m²) | Dimensional Tolerance |
| Galvanized Coils | 2.0/0.40 | 1270/600 | — | 580 or 610 | 1500 Max | 12 Max | 450 – 80 | En10143 |
| Galvanized Sheets | 6.0/2.0 | 1272/600 | 4000/1000 | — | — | 10/2 Tons | 450 – 80 | En10143 |
| Galvanized Coils and Sheets | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Product Type | Grade | Yield Strength (N/mm² Minimum) | Tensile Strength (N/mm²) | Elongation (%) (Minimum) | Mechanical Properties | Equivalent International Specifications | |||
| Bending Test | Impact Test | Joule (Minimum) at Temp °C | Zinc Coating Weight (g/m²) | ||||||
| General Construction | M 1 G | 250 Minimum | 350 to 500 | 18 | Standard Length 50 mm | T 1 | — | 80 – 450 | EN 10147: S250GD+Z S280GD+Z S320GD+Z EN 10146: S250GD+Z S280GD+Z S320GD+Z EN 10130 |
| Cold Forming | M 2 G | 300 Maximum | 300 to 420 | 26 | Touching | — | — | 80 – 350 | EN 10346: DX51D+Z/ZF DX52D+Z/ZF |
| M 3 G | 260 Maximum | 280 to 380 | 30 | Touching | 7.4 | 10.5 | 80 – 275 | — | |
Coated rolls and sheets
| Product | Thickness (mm) from/to | Width (mm) | Length (mm) | Inner Diameter (mm) | Outer Diameter (mm) | Weight (tons) | Technical Specifications | Zinc Layer Weight (g/m²) | Paint Layer Weight (microns) – Standard | Paint Layer Weight (microns) – Plastic | Paint Layer Weight (microns) – Adhesive | Dimensional Tolerance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Coated Coils (Galvanized and Non-Galvanized) | 0.4 – 1.50 | 600 – 1270 | — | 508 or 610 | 1500 max | 12 max | EN 10169 | 450 – 80 | 20 – 30 | 200 – 300 | 200 | EN 10143 |
| Galvanized Sheets | 0.4 – 1.50 | 600 – 1270 | 1000 – 4000 | — | — | 2 – 10 | EN 10169 | 450 – 80 | 20 – 30 | 200 – 300 | 200 | EN 10143 |