| Types, Dimensions, and Technical Specifications | ||||||||
|---|---|---|---|---|---|---|---|---|
| Product | Thickness (mm) From/To | Width (mm) From/To | Length (mm) From/To | Inner Diameter (mm) | Outer Diameter (mm) | Maximum Weight (ton) | Zinc Coating Weight (g/m²) | Area in Dimensions |
| Galvanized Coils | 2.0/0.40 | 1270/600 | – | 580 or 610 | Maximum 1500 | Maximum 12 | 450-80 | EN 10143 |
| Galvanized Sheets | 6.0/2.0 | 1272/600 | 4000/1000 | – | – | 10/2 ton | ||
| Mechanical Properties | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Product Type | Document | Mechanical Properties | Zinc Coating Weight (g/m²) | International Standards | ||||||
| Yield Strength (N/mm²) | Tensile Strength (N/mm²) | Elongation (≥ 80 mm) | Bend Test | Impact Strength at -20°C | ||||||
| Standard Length 80 mm | Standard Length 50 mm | 0.5 | 1.0 | 1.5 | ||||||
| General Construction | 1 M H | 250 Minimum | 350 to 500 | 18 | 1 T | – | 80 – 450 | EN 10147 S250GD+Z S280GD+Z S320GD+Z EN 10146 S250GD+Z S280GD+Z S320GD+Z EN 10130 | ||
| Cold Forming | 2 M H | 300 Maximum | 300 to 420 | 26 | Contact | – | 80 – 350 | EN 10346 DX51D+Z/ZF DX52D+Z/ZF | ||
| Deep Drawing | 3 M H | 260 Maximum | 280 to 380 | 30 | Contact | 7.4 | 9.4 | 10.5 | 275-80 | |
| Types, Dimensions, and Technical Specifications | ||||||||
|---|---|---|---|---|---|---|---|---|
| Product | Thickness (mm) From/To | Width (mm) From/To | Length (mm) From/To | Inner Diameter (mm) | Outer Diameter (mm) | Maximum Weight (ton) | Zinc Coating Weight (g/m²) | Area in Dimensions |
| Galvanized Coils | 2.0/0.40 | 1270/600 | – | 580 or 610 | Maximum 1500 | Maximum 12 | 450-80 | EN 10143 |
| Galvanized Sheets | 6.0/2.0 | 1272/600 | 4000/1000 | – | – | 10/2 ton | ||
| Mechanical Properties | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Product Type | Document | Mechanical Properties | Zinc Coating Weight (g/m²) | International Standards | ||||||
| Yield Strength (N/mm²) | Tensile Strength (N/mm²) | Elongation (≥ 80 mm) | Bend Test | Impact Strength at -20°C | ||||||
| Standard Length 80 mm | Standard Length 50 mm | 0.5 | 1.0 | 1.5 | ||||||
| General Construction | 1 M H | 250 Minimum | 350 to 500 | 18 | 1 T | – | 80 – 450 | EN 10147 S250GD+Z S280GD+Z S320GD+Z EN 10146 S250GD+Z S280GD+Z S320GD+Z EN 10130 | ||
| Cold Forming | 2 M H | 300 Maximum | 300 to 420 | 26 | Contact | – | 80 – 350 | EN 10346 DX51D+Z/ZF DX52D+Z/ZF | ||
| Deep Drawing | 3 M H | 260 Maximum | 280 to 380 | 30 | Contact | 7.4 | 9.4 | 10.5 | 275-80 | |